Awabot Pro robot - Flash Awabot software to SD card

These instructions are for Awabot Pro robots only. Do not use this procedure for Awabot One robots.

Required materials

• Software: balenaEtcher (recommended)
• Disk Image: Download the Awabot Image
• SD Cards: 4 GB or greater, preferably Class 10 (Existing or new).

SD card creation

1. Remove SD Card: Power off the robot and remove the rear hatch from the head to retrieve the SD card (and the spare located inside the hatch).
2. Open Etcher: Insert the SD card into your computer and launch BalenaEtcher.
3. Select Image: Choose Flash from File and select the extracted .img file.
4. Select Target: Click Select target and choose your SD card.
5. Flash: Click the Flash button and wait for completion.
6. Deploy: Insert the written SD card into the robot and power it on.
7. Pairing: Connect to WiFi and provide the pairing code displayed on the screen to Awabot Support.