Awabot Pro robot - Cleaning and sanitizing

To ensure optimal performance, keep your robot and its dock clean and free of dust. We recommend performing these maintenance steps weekly or as needed. 

Dusting the robot

1. Guide the robot off of the charging dock.
2. Power down your robot system.
3. Use a soft microfiber cloth to dust all robot and dock surfaces.

Cleaning charging contacts

Accumulated debris on contacts can interfere with charging.

1. Guide the robot off of the charging dock.
2. Power down your robot system.
3. Disconnect the charging dock from the power source.
4. Use a cotton swab dipped in rubbing alcohol to clean the metal charging contacts on both the dock and the robot.

Sanitizing the robot

1. Guide the robot off of the charging dock.
2. Power down your robot system.
3. Disconnect the charging dock from the power source.
4. Wipe the surface areas using a lightly moistened germicidal disposable wipe.
5. Allow the system to dry completely before pressing the Power button to reboot.

Note: Disinfectant wipes should be used sparingly, and they must be only slightly damp.

UV disinfection

While UV light is effective for sanitization, we have not yet tested the long-term effects of UV exposure on the robot’s hardware durability. Use UV disinfection methods at your own discretion.